Ikelite 200DLM/A Underwater Housing for Olympus OM-D E-M10 III / E-M10 IV (without Port)

‹ Back

Ikelite 200DLM/A Underwater Housing for Olympus OM-D E-M10 III / E-M10 IV (without Port) | Bild 2

1,050.00 CHF / Pc.

incl. 8.1% Tax

Stock: 0

Art. no.: 69531

NumberPc.

Remember

Request for this article ›

Description

Ikelite 200DLM/A Underwater Housing for Olympus OM-D E-M10 III / E-M10 IV Mirrorless Cameras

The 200DLM/A Underwater Housing is the perfect companion allowing use of the Olympus OM-D E-M10 Mark III and Mark IV mirrorless micro four-thirds cameras in or around the water for scuba, snorkeling, surf, pool, or any adventure.

Fiber optic strobe connection is supported only with the E-M10 III camera. Additional of an optional bulkhead and hotshoe is required to use an external flash with the E-M10 IV.

Options for adding a flash trigger are:

B1A Bulkhead # 46002 + Hotshoe # 46071 for manual triggering of Ikelite or non-Ikelite strobes
DL3 DS Link Panasonic & Olympus TTL Converter Ikelite PT1 Hotshoe and B1A Bulkhead Kit # 46036 for TTL or manual triggering of compatible Ikelite DS strobes
Fiber optic triggering NOT supported with E-M10 IV camera

"DLM" LENS PORT REQUIRED (Sold Separately)

Made in USA

Compact, full-featured, and built to last

Controls: Controls for all camera functions except Fn lever, preview button, and diopter adjustment dial
Strobe Connector: Fiber Optic Ports
Port Mount: DLM (Dry Lock Micro)
Accessory Port: 1/2-20 Thread
Depth Rating: 60 meters
Weight: 1.3 kg
Dimensions: 197 x 146 x 133 mm
Rear O-Ring: 0110
Front O-Ring: 0132.36

Pre-Dive Checks

There is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. The Ikelite signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.

We recommend adding the optional Vacuum Kit with 1/2" Valve # 47012 to pull a vacuum on the housing and check for leaks prior to entering the water.

Construction

Ikelite specially formulated ABS-PC blend housing is highly durable yet significantly lighter than aluminum. The light color keeps your camera cooler when shooting in warm, sunny environments.

Lens support

Ikelite lens ports are the lightest on the market, yet robust and capable of standing up to rough surf.

Ikelite support a wide variety of lenses. Most popular zoom lenses and select focus rings can be engaged using simple gearing that puts adjustment right at your fingertips. Zoom and focus gears differ depending on which lens you are using.

Lens ports and zoom gears sold separately. Refer to the appropriate port chart for compatibility information.

Wi-Fi Transfer

Use the camera's built-in Wi-Fi feature to download photos to another device without removing the camera from the housing. The Wi-Fi feature is only usable above water within close proximity to the connected device.

Compatibility

Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.

Differences in lens and control placement prevent other camera models from being used in or adapted to this housing. We are not aware of any other models which may be used in or adapted to this housing.

In the box

Housing
Camera Mount for E-M10 Mark IV # 95418 (installed)
Camera Mount for E-M10 Mark III # 95413
Rear O-Ring # 0110 (installed)
Front O-Ring # 0132.36 (installed)
.050" Hex Key # 0945.11
1/16" Hex Key # 0945.16
Silicone Lubricant 1cc Tube