Nauticam Atomos Ninja V Housing for Atomos Ninja V and Ninja V+ 5" Recorder/Monitor/Player

THE NAUTICAM NA-NINJA V UNDERWATER HOUSING

The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0.

The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers.  The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well.  With dual M28 bulkheads, a second HDMI cable can be run to another monitor.  The Ninja V allows for the application of. cube format 3D LUTs to this output signal.

The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time.  A CR-2032 battery powers the vacuum check and leak detection system.  When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing.

 Access to the touchscreen controls of the Ninja V are handled via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.  

RESOURCES

What's In The Box:

• NA-Ninja V Housing
• Monitor Hood
• M16 Vacuum Valve (pre-installed) PN 25625
• Spare silicone rubber main o-ring PN 90137
• O-ring removal tool and lubricant
• CR2032 battery

Recommended Accessories:

• 25077 HDMI 2.0 Cable for NA-XT3 Housing
• 25078 HDMI 2.0 Cable for NA-BMPCCII/S1R Housing
• 25079 HDMI 2.0 Cable for NA-GH5V Housing
• 25082 HDMI 1.4 Cable for HDMI Bulklhead
• 25046 HDMI (D-D) cable in 200mm length for HDMI Bulklhead in NA-EM1X Housing

With more cameras offering high quality HDMI video output, the Atomos Ninja V steps in, not only as a stunning monitor but also as a recorder of 4K 60p 4:2:2 10-bit video to on-board SSD drives in edit-friendly ProRes or Avid formats.  The Nauticam NA-Ninja V, when used with supported housings and cameras, allows for the connection of the Ninja V over HDMI 2.0 in addition to providing easy access to the NInja V controls underwater.

TECHNICAL SPECIFICATIONS

Dimensions : 224mm x 169mm x 113mm (W x H x D)

Weight in Air: ~1.62kg

Weight in Water: -0.36kg (with monitor, Atom X SSD, NP-F970 batt)

Depth Rating: 100m 

NOTE: HDMI cables for this housing are SOLD SEPARATELY, you can find the appropriate one in the Recommended Accessories section below.