Ikelite Optic. Slave Conv. f. FiberOptic / RemoteSlave Triggerin

125.00 CHF / Pz.
incl. 8.1% Tasse
Magazzino: 0
Art. n.: 4403
NumeroPz.
Ricorda

Descrizzione

Optical Slave Converter for Fiber Optic / Remote Slave Triggering

Trigger your Ikelite DS-series strobe off any camera or strobe flash. The Optical Slave Converter simply attaches to the strobe's electrical bulkhead in place of a sync cord connector. The enlarged slave window provides approximately 90 degrees field of view for remote triggering. Or thread on the included fiber optic port for the attachment of and triggering via a fiber optic cord.

For SEA&SEA or Nauticam housings with internal fiber-optic flash triggering devices, we recommend the Fiber Optic Converter, see below.

Strobe triggering

The Optical Slave Converter can be extended using the optional 3-foot Extension Cord for creative backlighting in wrecks, caves, and pool studio set-ups. It can also be used above water for studio photography work.

The Optical Slave Converter supports manual exposure modes as set on the attached DS strobe. TTL exposure mode is not supported.

An individual Optical Slave Converter is needed for each strobe. Use of multiple strobes requires one Optical Slave Converter per strobe. The Optical Slave Converter supports DS50, DS51, DS125, DS160 and DS161 strobes.

Pre-flash auto detection

The Optical Slave Converter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. Simply turn on your strobe and take one picture to configure.

Fiber optic cord compatibility

  • Ikelite 4501 Fiber Optic Coiled Cord
  • INON Optical D Cable "Non-wireless type" L-Connector
  • Sea&Sea Fiber Optic Cable (L-type) Product No. 50107
  • Olympus UW Fiber Optic Cable PTCB-E02
  • Nauticam Optical Fiber Cable No. 26211 Nauticam to INON
  • Nauticam Optical Fiber Cable No. 26212 Nauticam to Sea&Sea

What's included

  • Converter
  • Silicone lubricant

Specifications

  • 1.1 diameter x 2.7 in (28 x 69 mm)
  • Weighs 1.6 oz (45 g)
  • Depth rating 300 ft (90 m)

Spare parts (optional)

  • 0301.12 Connector protector
  • 0136.13 O-ring
  • 0184.2 Silicone lubricant 2cc recloseable tube

 

L'articolo è stato aggiunto!

Consigliamo anche i seguenti accessori: